MEP Estimation Training in Dubai – HVAC & Electrical
Kick-start a high-demand career in the UAE construction industry with MEP Estimation Training in Dubai at Solve Tech. Learn HVAC, Electrical, and Plumbing estimation skills used in real Dubai projects and get job-ready with industry-focused training.
Book Your Free Demo Class Today
Enroll Now TodayWhy Join Solve Tech for MEP Estimation Training?
- Hands-On Learning
- Industry-Relevant Curriculum
- 100% internship assistance
- Expert Trainers with Real Field Experience
- Weekday & Weekend Batches
- KHDA Certified with Career Support
- 100% Practical Training
- Trusted by Dubai’s Leading Companies
- Affordable with EMI Options
Submit your details to check course availability
What You Learn in This MEP Cost Estimation Training in Dubai
| Module | Topics Covered |
|---|---|
| MEP Estimation Workflow Overview | Complete workflow of MEP estimation for HVAC, electrical, and plumbing systems |
| MEP Drawings & Plan Interpretation | Understanding MEP drawings, symbols, schematics, layouts, and plan analysis |
| Quantity Takeoff Techniques | Manual and software-based QTO for ducts, pipes, cables, fittings, and system components |
| BOQ Preparation | BOQ creation aligned with Dubai Municipality guidelines and UAE project requirements |
This MEP Cost Estimation Training in Dubai teaches BOQ prep, quantity takeoff, and HVAC, electrical, and plumbing cost calculations. Learn UAE-standard methods, material pricing, and budgeting to gain practical, job-ready skills with certification from Solve Tech.
MEP Estimation Courses in Dubai – Quantity Takeoff & BOQ Preparation
Boost your career in Dubai’s fast-growing construction sector with MEP Estimation Courses in Dubai – Quantity Takeoff & BOQ Preparation at Solve Tech Training Institute. This industry-focused program trains you to accurately estimate HVAC, Electrical, and Plumbing systems using real UAE project standards. You’ll learn complete quantity takeoff methods, BOQ preparation, costing techniques, and tender documentation used by top contractors and consultants. The course also introduces essential software tools for digital estimation, helping you work faster and more confidently. With expert trainers, practical case studies, and hands-on exercises, Solve Tech prepares you for high-demand MEP estimation roles in Dubai’s competitive job market.
Experience a Free Trial Session – Join Today!
Apply now
Who Should Take This MEP Estimation Training in Dubai?
Build your career in the UAE’s growing MEP sector with this MEP Estimation Training in Dubai. At Solve Tech, you’ll learn quantity takeoff, BOQ preparation, and HVAC–electrical–plumbing cost calculations using UAE-standard workflows—skills highly valued by contractors and consultants.
- Students & graduates in Mechanical, Electrical, and Civil Engineering.
- Professionals looking to build careers in MEP estimation, planning, project costing, or tendering.
- MEP Site Engineers transitioning into office-based estimation roles.
- Freshers seeking high-demand job-ready skills in Dubai’s booming construction sector.
- Quantity Surveyors aiming to specialize in MEP cost management.
- Contractors, consultants, and freelancers working on MEP projects.
At Solve Tech Training Institute, you learn through real project examples, hands-on exercises, and UAE-focused estimation practices—preparing you to deliver accurate, professional, and industry-ready MEP cost estimates.
Book Your Seat Now!
MEP Estimation Training
- Duration : 30 Hours
- Frequency : Monthly
- Days : Weekend & Weekdays
- Delivery Modes : Online | Offline | Hybrid
Tools We Use in Our MEP Estimation Training
- CostX / PlanSwift for digital quantity takeoff
- Excel Estimation Templates
- AutoCAD MEP drawings interpretation
- Duct & Pipe Sizing Tools
- HVAC, Electrical & Plumbing BOM Sheets
- Integration with Revit MEP models (optional module)
Benefits of the MEP Cost Estimation Courses
- Learn accurate Quantity Takeoff & BOQ preparation for HVAC, Electrical & Plumbing systems.
- Master UAE-standard estimation methods used by top MEP contractors.
- Improve project costing, budgeting, and tender preparation skills.
- Gain hands-on experience with industry tools like CostX / PlanSwift.
- Build confidence in reading and interpreting MEP drawings.
- Enhance employability for estimation, QS, planning & tendering roles.
- Reduce project errors with precise material and labor cost forecasting.
- Become job-ready for Dubai’s high-demand construction industry.
MEP Estimation Course Outline
Module 1: Introduction to MEP Estimation
- Overview of HVAC, Electrical & Plumbing systems
- UAE construction standards & tender documentation
- Understanding estimation fundamentals
Module 2: Drawing Reading & Quantity Takeoff
- Reading HVAC, Electrical & Plumbing drawings
- Duct, pipe, cable, fixture & equipment measurement
- Manual & software-based QTO practice
Module 3: HVAC Estimation
- Ducting, piping, insulation & equipment costing
- Chillers, FAHUs, FCUs, VAVs, GI ducts & accessories
- Project-based quantity and cost calculations
Module 4: Electrical Estimation
- Cable sizing, conduit layouts & panel board estimation
- Lighting, power, ELV systems & DB sizing
- Practical electrical BOQ preparation
Module 5: Plumbing & Drainage Estimation
- Water supply, drainage systems & pump selection
- Piping material identification and estimation
- Fixture count, riser layouts & BOQ creation
Module 6: BOQ Preparation & Costing
- Material, labor & equipment cost estimation
- Market rate sourcing and vendor comparison
- Preparing professional BOQs for tender submission
Module 7: Value Engineering & Cost Optimization
- Reducing project cost without affecting performance
- Alternative material solutions
- Risk analysis & budgeting techniques
Module 8: Software Training
- Hands-on with CostX / PlanSwift
- Digital QTO automation
- Excel-based rate analysis templates
Module 9: Documentation & Reporting
- Preparing tender reports
- Pricing sheets, comparison sheets & technical submissions
- Client-ready estimation documentation
Module 10: Real-World MEP Estimation Projects
- HVAC, Electrical & Plumbing estimation projects
- High-rise building BOQ preparation
- Final assessment + Solve Tech certification
Watch Our Course Preview
Advanced MEP Estimation Training in Dubai – Project Costing & Value Engineering
Solve Tech Training offers Advanced MEP Estimation Training in Dubai for professionals who want to master project costing, quantity takeoff, and value-engineering skills used across UAE construction projects. This program focuses on real-site workflows, accurate BOQ preparation, tender pricing, and system-wise estimation for HVAC, electrical, and plumbing. Trainees learn with industry software such as Planswift, Bluebeam, and Excel-based costing tools to perform precise calculations and cost optimization. With expert instructors, practical assignments, and Dubai-specific project standards, Solve Tech Training ensures you gain the confidence, technical depth, and job-ready skills required to grow in the competitive MEP estimation field.
Register Now
Success in Numbers
1000+
Trained Students
KHDA
Certification
30+
Expert Instructors
100%
Satisfaction
Latest Update
Get Your Free Consultation Now
Our Expert Consultants
Will Reach You Soon
Submit your details to check course availability
Key Benefits
Standard curriculum
Hands-on practical training
Industry-expert instructors
Flexible batch options
Recognized Certification
FAQ About MEP Estimation Training - SolveTech
It is a professional program focused on advanced quantity takeoff, project costing, and value engineering for HVAC, electrical, and plumbing systems based on Dubai project standards.
Engineers, QS professionals, draftsmen, fresh graduates, and anyone looking to build a strong career in MEP estimation and UAE construction projects.
You will work with Planswift, Bluebeam, Excel costing sheets, and other estimation tools commonly used by Dubai consultants and contractors.
You will learn advanced BOQ preparation, tender pricing, cost optimization, value engineering, and system-wise estimation for HVAC, electrical, and plumbing services.
Yes. All training modules follow real UAE project workflows, formats, and industry requirements.
Absolutely. You will practice on live project samples, drawings, and estimation scenarios to gain real-world hands-on experience.
Yes. The course builds job-ready skills highly demanded by contractors, consultants, and MEP companies across Dubai, boosting your employability and career growth.